Control-M Upgrade

The Control-M upgrade process upgrades your current version of Control-M/Enterprise Manager, Control-M/Server, and Control-M/Agent to the latest annual or fix pack version on the same computer. This eliminates the need to migrate data and reduces downtime. To minimize downtime, Control-M processes stay up during the upgrade preparation process, which prepares all the required files. After the preparation completes, you are prompted to confirm the shutdown of Control-M processes. After the processes are shut down, the upgrade begins and completes with minimum downtime.

The upgrade process supports compatibility across all Control-M components, as follows:

• An upgraded Control-M/EM is compatible with lower versions of Control-M/Server (from 9.0.19 and higher).

• An upgraded Control-M/Server is compatible with lower versions of Control-M/EM (from 9.0.19 and higher).

• An upgraded Control-M/EM is compatible with lower versions of Control-M client (from 9.0.19 and higher). However, the new features of the higher version are disabled.

  For more information, see Compatibility Mode and Control-M Client and Control-M/EM Server Compatibility Scenarios.

• An upgraded Control-M/Server is compatible with lower versions of Control-M/Agent (9.0.00.300 and higher).

• An upgraded Control-M/Agent is compatible with lower versions of Control-M/Server (9.0.19 and higher).

The following is a typical scenario of the upgrade flow:

• Control-M/EM server: After the upgrade completes, Control-M/EM is in Compatibility Mode and older Control-M clients that were not upgraded can still work with the upgraded Control-M/EM server.

• Control-M clients: The new features are disabled in Compatibility Mode. You can upgrade manually or with Client Distribution.

• Control-M/Server

• Turn off Compatibility Mode, as described in Turning off Compatibility Mode.

• Control-M/Agents: You can upgrade manually or with Control-M/Agent deployment.

Before you upgrade, review Upgrade Requirements and Considerations

The following procedures describe how to upgrade Control-M/EM, Control-M/Server, and Control-M/Agent:

• Upgrading Control-M/EM on UNIX

• Upgrading Control-M/EM on Windows

• Upgrading Control-M Client on Windows from the Full Installation Package

• Upgrading Control-M/Server on UNIX

• Upgrading Control-M/Server on Windows

• Upgrading Control-M/Agent on UNIX

• Upgrading Control-M/Agent on Windows

If you are using the BMC dedicated PostgreSQL database, after you have upgraded Control-M/EM or Control-M/Server, the PostgreSQL database server version remains the same and must be upgraded, as described in Control-M Upgrade.

If you are using an Oracle or MSSQL external database, see Upgrading an External Oracle or MSSQL Database Server.

Upgrade Requirements and Considerations

The following table lists requirements and considerations to review prior to the upgrade:

Component / Topic	Requirement
New Features	You must upgrade both Control-M/EM and Control-M/Server to use the new features of Control-M 9.0.21.
PostgreSQL Database Server	You must upgrade PostgreSQL database server to version 11.5 to use version 9.0.21. If you do not upgrade, Control-M might not work as expected.
Compatibility Mode	If Compatibility Mode is on, you can connect Control-M client 9.0.19 and higher to other 9.0.21 environments. After you turn Compatibility Mode off, you can only connect Control-M client 9.0.21 to other 9.0.21 environments. If Compatibility Mode is on, you cannot deploy Control-M/Agent 9.0.21 packages. After you upgrade to Control-M 9.0.21 and turn Compatibility Mode off, you can no longer downgrade Control-M to a version lower than 9.0.21 since the password encryption method changes. After you upgrade to Control-M 9.0.21 and before you turn Compatibility Mode off, you can backup passwords with the following command: em util -U <username> -P <password> -export -type user -file user-exp-before-921.txt
Promotion	Promotion from one environment to another is only possible if the source and target Control-M/EM machines are the same version. If you upgrade Control-M/EM on the source machine and Compatibility Mode is off, you must edit any previously defined target promotion environments to update password encryption. If you upgrade Control-M/EM on the target machine and Compatibility Mode is off, you must log in at least once on the target machine prior to promotion to update password encryption. If you upgrade Control-M/EM on both the source and target machines, and Compatibility Mode is on, promotion always completes successfully.
HTTPS Protocol	The Control-M client connects to the Control-M/EM server via the Control-M Web Server. After the upgrade, BMC recommends to use the HTTPS protocol with a secured port as opposed to the insecure HTTP protocol. For Control-M Web, you are automatically redirected to an HTTPS protocol with the secured port.
Control-M/Agent	You can upgrade Control-M/Agent 9.0.00.300 and higher to version 9.0.21.
Control-M/EM Distributed	In a Control-M/EM Distributed environment, you must install the same version on both the Control-M/EM server and Control-M/EM Distributed hosts, as described in Upgrading Control-M/EM on UNIX and Upgrading Control-M/EM on Windows. The Control-M Workload Archiving server and Control-M Workflow Insight server upgrade automatically when you upgrade Control-M/EM Distributed.
Client Distribution	This feature is disabled during upgrade. After the upgrade, you can only distribute Control-M client 9.0.19 and higher. For more information, see Client Distribution.
SSL	Control-M/EM: If the CmsCommMode system parameter value is SSL, or AUTO, (with at least one Control-M/Server is connected via SSL): The security policy must not use a .kdb file keystores The security policy must be configured to the TLS 1.2 protocol before the upgrade. If you installed Control-M/EM 9.0.20.205, you must disable SSL before you upgrade to 9.0.21. Control-M/Server: If your Control-M/Server is configured to work in SSL mode and Control-M/Server is using a KDB keystore, the upgrade is aborted. If your Control-M/Server is configured to work in TCP mode, Control-M/Server upgrade procedure installs the default PKCS12. If Control-M/Server is configured to use SSL protocol less than TLS1_2(SSLv3 or TLS1), update the SSL protocol to TLS1_2. If you installed Control-M/Server 9.0.20.204, you must disable SSL before you upgrade to 9.0.21. Control-M/Agent: If your Control-M/Agent is configured to work in SSL mode and Control-M/Agent is using a KDB keystore, the upgrade attempts to convert the KDB to PKCS12. If this fails, the upgrade aborts and prompts you to manually replace KDB to PKCS12 keystore. If your Control-M/Agent is configured to work in TCP mode, Control-M/Agent upgrade procedure installs the default PKCS12. If Control-M/Agent is configured to use SSL protocol less than TLS1_2(SSLv3 or TLS1), update the SSL protocol to TLS1_2. For more information about security policy attributes, see Security Policies.
High Availability	If you are upgrading in a High Availability environment, see High Availability Requirements. If you set the secondary to Primary after a failover, you cannot downgrade to an earlier version. You must fall back to the Primary and then you can downgrade.
Demo Ha Cluster Scripts	If modified demo scripts from previous versions are stored in the $HOME/ctm_em/bin directory, they are overwritten during the upgrade and you must recreate them. BMC recommends to back up the scripts separately, or modify the new demo scripts that are placed in the directory as part of the upgrade. For more information, see Modifying the Demo Ha Cluster Script .
Site Standards	Site Standards you created in the original version of Control-M are backed up in the def_items_table_backup.dat file when you upgrade. If you want to downgrade, see Restoring Site Standards after Downgrade.
Rule Based Calendars	After you upgrade, if you have Rule Based Calendars with specific dates, you must Force Upload them to the Control-M/Server.

Upgrade Scenarios

The following table lists the supported upgrade options to upgrade to 9.0.21 based on your database and version.

Database	Version	Upgrade Action
PostgreSQL (Dedicated)	9.6 9.5	Upgrade to Control-M 9.0.20. Upgrade to PostgreSQL 11.5. Upgrade to Control-M 9.0.21.
	10.4	Upgrade to Control-M 9.0.21. Upgrade to PostgreSQL 11.5.
	11.5	Upgrade to Control-M 9.0.21.
Oracle	11 12c 18c	Upgrade to Oracle 19C. Upgrade to Control-M 9.0.21.
	19c	Upgrade to Control-M 9.0.21
MSSQL	2008 2012	Upgrade to MSSQL 2014 or higher (Windows 2012R2 or 2016 only). Upgrade to Control-M 9.0.21.
	2014 SP3	Upgrade to Control-M 9.0.21 (Windows 2012R2 or 2016 only).
	2016 2017 2019	Upgrade to Control-M 9.0.21.
PostgreSQL (Existing)	9 or lower	Upgrade to Control-M 9.0.20. Upgrade to PostgreSQL 11.x or 12.x. Upgrade to Control-M 9.0.21
	10.x	Upgrade to Control-M 9.0.21 Upgrade to PostgreSQL 11.x, 12.x, 13.x, or 14.x.
	11.x 12.x 13.x 14.x	Upgrade to Control-M 9.0.21.

Compatibility Mode

Compatibility Mode allows users with previous versions of the Control-M client to connect to the latest version of Control-M/EM server in addition to the upgraded Control-M clients. However, when Compatibility Mode is on, new features are disabled in upgraded Control-M clients. This ensures system integrity during the transition to a higher version. After Compatibility Mode is turned off, the new features are enabled in the upgraded Control-M clients and older clients are disconnected. Users that have not upgraded their Control-M clients cannot log in.

The following table lists the features that are disabled in Control-M clients after you have upgraded and compatibility mode is on.

Source Version	Disabled Features
9.0.20.xxx	Users Roles API Tokens Run as Management System Settings IdP Authentication (SAML) Reference Folder SHA512 encryption algorithm
9.0.19.xxx	User Views (Web) Site Standards (Web) XML validation 85 character host name limit Centralized Connection Profile Control-M MFT Enterprise (Web) RBA Authorizations 9.0.20.xxx features

Turning off Compatibility Mode

This procedure describes how to turn off Compatibility Mode, which enables new features in upgraded clients.

Begin

1. From the CCM in the Manage tab, click Compatibility Mode.

2. Click I have read and understand.

3. Click Turn Off Compatibility Mode.

   Control-M/EM server components are restarted automatically.

Control-M Client and Control-M/EM Server Compatibility Scenarios

The following table lists the different Control-M client and Control-M/EM server compatibility scenarios after you upgrade Control-M/EM server from the source (compatibility version) to the new target version.

Control-M/EM Server Source Version	Control-M/EM Server Target Version	Client Version	Result
9.0.19.xxx	9.0.21	9.0.19.xxx Compatibility Mode: On	Success
9.0.19.xxx	9.0.21	9.0.19.xxx Compatibility Mode: Off	Fail Reason: If compatibility mode is off, the client must be in the same major release as the server target version.
9.0.19.xxx	9.0.21	9.0.21 Compatibility Mode: On	Success

Upgrading Control-M/EM on UNIX

This procedure describes how to upgrade from Control-M/EM 9.0.19 (Default and Distributed) and higher to the latest version of Control-M/EM on UNIX. If you want to upgrade multiple instances of Control-M/EM on several computers using the same configuration, use the automatic installation, as described in this procedure.

Before You Begin

Ensure that you have met the following requirements:

• Verify that your operating system and database software is compatible with the new version of Control-M/EM, as described in Control-M/EM UNIX System Requirements.

• Define the external Java location, as described in Control-M Pre-Installation Procedures.

• If you are upgrading Control-M in a cluster environment, see Control-M/EM Cluster Configuration.

Begin

1. Copy the installation files from the temporary directory that you created in Obtaining Control-M installation files, to the home directory.

2. Set your DISPLAY environment variable, as described in Setting Environment Variables in UNIX.

3. From your home directory, type the following command:

   <source_path>/setup.sh

4. Do one of the following:

   • Interactive upgrade: Select the Control-M/Enterprise Manager option and continue with the on-screen instructions until the upgrade is complete.

   • Automatic upgrade: Create a parameter file and then run the automatic install in a non-interactive mode, as follows:

     1. Select the Control-M/Enterprise Manager option and continue with the on-screen instructions until the Summary window.

        There is no confirmation to shut down Control-M/EM processes. It is done automatically.

     2. Click Generate and select the location to create the XML parameter file.

     3. Click Yes to quit the upgrade.

        A confirmation message appears.

     4. Click Yes.

     5. Copy the automatic upgrade parameters file to a network location that is accessible to all computers where you want to perform an automatic upgrade.

     6. To run the upgrade script, type the following command:

        <source_path>/setup.sh -silent <xml_path>/<filename.xml>

        The upgrade logs can be found at the following location:

        <$HOME>/BMCINSTALL/log/BMC_Control-M_Enterprise_Manager_<date-time>.log

        To ensure compatibility between older versions of Control-M client, Control-M/EM is now running in Compatibility Mode.

        By default, Control-M/EM and Control-M clients are configured to work with HTTP. To secure your environment, BMC recommends to change your configuration to HTTPS, as described in Zone 1 SSL Configuration.

Upgrading Control-M/EM on Windows

This procedure describes how to upgrade from Control-M/EM 9.0.19 (Default and Distributed) and higher to the latest version of Control-M/EM on Windows. If you want to install multiple instances of Control-M/EM on several computers using the same configuration, use the automatic installation, as described in this procedure.

Before You Begin

• Ensure that your operating system and database software is compatible with the new version of Control-M/EM, as described in Control-M/EM Windows System Requirements.

• Define the external Java location, as described in Control-M Pre-Installation Procedures.

• If you are installing on a cluster environment, see Control-M/EM Windows Cluster Configuration.

• If MSSQL 2016 and higher is installed on the same host as Control-M/EM, you must shut down the PolyBase service before upgrading.

Begin

1. Log in to the computer using a user ID that has Administrator permissions.

2. Copy the installation files from the temporary directory that you created in Obtaining Control-M installation files, to the home directory of the drive where the existing Control-M/EM is installed.

3. From a command prompt window, enter <source_path>\setup.exe.

4. Do one of the following:

   • Interactive upgrade: Select the Control-M/Enterprise Manager option and continue with the on-screen instructions until the upgrade is complete.

   • Automatic upgrade: Create a parameter file and then run the automatic install in a non-interactive mode, as follows:

     1. Select the Control-M/Enterprise Manager option and continue with the on-screen instructions until the Summary window.

        There is no confirmation to shut down Control-M/EM processes. It is done automatically

     2. Click Generate and select the location to create the XML parameter file.Click Yes to quit the upgrade.

     3. Click Yes to quit the upgrade.

     4. A confirmation message appears.Click Yes.

     5. Copy the automatic upgrade parameters file to a network location that is accessible to all computers where you want to perform an automatic upgrade.

     6. Log in using a user ID that has Administrator permissions on the current computer.

     7. Ensure that the upgrade DVD is still in the DVD drive, and run the upgrade script, as follows:

        <source_path>\Setup_files\components\em\setup.exe -silent <xml_path>\<filename.xml>

        The upgrade log can be found at the following location:

        %temp%\BMC_Control-M_Enterprise_Manager_<date-time>.log

        To ensure compatibility between older versions of Control-M client, Control-M/EM is now running in Compatibility Mode.

        By default, Control-M/EM and Control-M clients are configured to work with HTTP. To secure your environment, BMC recommends to change your configuration to HTTPS, as described in Zone 1 SSL Configuration.

Upgrading Control-M Client on Windows from the Full Installation Package

This procedure describes how to upgrade the Control-M client to the latest version on Windows from the Full installation package. If you want to install multiple instances of Control-M client on several computers using the same configuration, use the automatic installation, as described in this procedure.

Before You Begin

• Ensure that your operating system is compatible with the new version of the Control-M client, as described in Control-M/EM Windows System Requirements.

Begin

1. Log in to the computer using a user ID that has Administrator permissions.

2. Copy the installation files from the temporary directory that you created in Obtaining Control-M installation files, to the home directory of the drive where the existing Control-M/EM is installed.

3. Do one of the following:

   • Define the external Java location, as described in Control-M Pre-Installation Procedures.

   • Run the following command:

     <source_path>\setup.exe -BMC_INST_JAVA_HOME <Java_PATH>

4. Do one of the following:

   • Interactive upgrade: Select the Control-M/Enterprise Manager option and continue with the on-screen instructions until the upgrade is complete.

   • Automatic upgrade: Create a parameter file and then run the automatic install in a non-interactive mode, as follows:

     1. Select the Control-M/Enterprise Manager option and continue with the on-screen instructions until the Summary window.

     2. Click Generate and select the location to create the XML parameter file.Click Yes to quit the upgrade.

     3. Click Yes to quit the upgrade.

     4. A confirmation message appears. Click Yes.

     5. Copy the automatic upgrade parameters file to a network location that is accessible to all computers where you want to perform an automatic upgrade.

     6. Run the upgrade script, as follows:

        <source_path>\Setup_files\components\em\setup.exe -silent <xml_path>\<filename.xml>

        The upgrade log can be found at the following location:

        %temp%\BMC_Control-M_Enterprise_Manager_<date-time>.log

Upgrading Control-M Client on Windows from the Client Installation Package

This procedure describes how to upgrade the Control-M client to the latest version on Windows from the client installation package. If you want to install multiple instances of Control-M client on several computers using the same configuration, use the automatic installation, as described in this procedure.

Before You Begin

• Ensure that your operating system is compatible with the new version of the Control-M client, as described in Control-M/EM Windows System Requirements.

• Ensure that Java 1.8 (64-bit) or higher is available in your Path Environment Variable.

Begin

1. Copy the installation files from the temporary directory that you created in Obtaining Control-M installation files, to the home directory of the drive where the existing Control-M/EM is installed.

2. From the same command line, run the following command:

   <source_path>\setup.exe

   • If Java is not available, run the following command:

     setup.bat -BMC_INST_JAVA_HOME <Java 11 installation directory>

     The Java installation directory must contain the bin directory and the Release file.

   • If the following error appears, Java (32-bit) is listed in your PATH environment variable. You need to set Java (64-bit) as the first path in the PATH environment variable.

     com.izforge.izpack.util.library.LibraryLoadExeception: error loading library.......Can't load AMD 64-bit .dll on a IA32-bit platform

3. Do one of the following:

   • Interactive upgrade: Follow the on-screen instructions until the upgrade is complete.

   • Automatic upgrade: Create a parameter file and then run the automatic install in a non-interactive mode, as follows:

     1. Follow the on-screen instructions until the Summary window.

     2. Click Generate and select the location to create the XML parameter file. Click Yes to quit the upgrade.

     3. Click Yes to quit the upgrade.

     4. A confirmation message appears. Click Yes.

     5. Copy the automatic upgrade parameters file to a network location that is accessible to all computers where you want to perform an automatic upgrade.

     6. Run the upgrade script, as follows:

        <source_path>\Setup_files\components\clientem\setup.bat -silent <xml_path>\<filename.xml>

        The upgrade log can be found at the following location:

        <installFolder>\BMCINSTALL\log\BMC_Control-M_client_<date-time>.log

Upgrading Control-M Client from the Control-M Welcome Page

This procedure describes how to upgrade the Control-M client on Windows from the Control-M Welcome Page. The Control-M/EM server and port are automatically configured during the installation.

Before You Begin

• Ensure that your operating system are compatible with the current version of the Control-M client, as described in Control-M Client and Control-M/EM Server Compatibility Scenarios.

• Ensure that Java 1.8 (64-bit) or higher is available in your Path Environment Variable.

Begin

1. Open a new browser window before you download and install.

2. Go to <Control-M/EM_Host>:<port>/Welcome/ and from the Control-M Client section, click Download.

3. Run the upgrade and continue with the on-screen instructions until the upgrade is complete.

   The upgrade log can be found at the following location:

   <installFolder>\BMCINSTALL\log\BMC_Control-M_client_<date-time>.log

   • If Java is installed but a Java is not found message appear, restart your Windows machine.

   • If the following error appears, Java (32-bit) is listed in your PATH environment variable. You need to set Java (64-bit) as the first path in the PATH environment variable.

     com.izforge.izpack.util.library.LibraryLoadExeception: error loading library.......Can't load AMD 64-bit .dll on a IA32-bit platform

Upgrading Control-M/Server on UNIX

This procedure describes how to upgrade from Control-M/Server 9.0.19 and higher to the latest version of Control-M/Server on UNIX. If you want to upgrade multiple instances of Control-M/Server on several computers using the same configuration, use the automatic upgrade, as described in this procedure.

Before You Begin

Ensure that you have met the following requirements:

• Verify that your operating system and database software is compatible with the new version of Control-M/Server, as described in Control-M/Server UNIX System Requirements.

• Define the external Java location, as described in Control-M Pre-Installation Procedures.

• Set the BMC_INST_CTM_APIGTW_PORT environment variable to 8393.

• If you are upgrading in a cluster environment, see Control-M/Server UNIX Cluster Configuration.

• If your current Control-M components were installed using the Full Installation method and you are upgrading from a version earlier than 9.0.20, upgrade Control-M/EM before upgrading Control-M/Server.

Begin

1. Copy the installation files from the temporary directory that you created in Obtaining Control-M installation files, to the home directory.

2. Set your DISPLAY environment variable, as described in Setting Environment Variables in UNIX.

3. From your home directory, type the following command:

   <source_path>/setup.sh

4. Do one of the following:

   • Interactive upgrade: Select the Control-M/Server option and continue with the on-screen instructions until the upgrade is complete.

   • Automatic upgrade: Create a parameter file and then run the automatic install in a non-interactive mode, as follows:

     1. Select the Control-M/Server option and continue with the on-screen instructions until the Summary window.

        NOTE: There is no confirmation to shut down Control-M/Server processes. It is done automatically.

     2. Click Generate and select the location to create the XML parameter file.

     3. Click Yes to quit the upgrade.

        A confirmation message appears.

     4. Click Yes.

     5. Copy the automatic upgrade parameters file to a network location that is accessible to all computers where you want to perform an automatic upgrade.

     6. To run the upgrade script, type the following command:

        <source_path>/Setup_files/components/ctm/setup.sh -silent <xml_path>/<filename.xml>

        The upgrade log can be found at the following location:

        <$HOME>/BMCINSTALL/log/BMC_Control-M_Server_<date-time>.log

Upgrading Control-M/Server on Windows

This procedure describes how to upgrade from Control-M/Server 9.0.19 and higher to the latest version of Control-M/Server on Windows. If you want to upgrade multiple instances of Control-M/Server on several computers using the same configuration, use the automatic upgrade, as described in this procedure.

Before You Begin

• Ensure that your operating system and database software is compatible with the new version of Control-M/Server, as described in Control-M/Server Windows System Requirements.

• Define the external Java location, as described in Control-M Pre-Installation Procedures.

• Set the BMC_INST_CTM_APIGTW_PORT environment variable to 8393.

• If you are upgrading in a cluster environment, see Control-M/Server Windows Cluster Configuration.

• If your current Control-M components were installed using the Full Installation method and you are upgrading from a version earlier than 9.0.20, upgrade Control-M/EM before upgrading Control-M/Server.

Begin

1. Log in to the computer using a user ID that has Administrator permissions.

2. Copy the installation files from the temporary directory that you created in Obtaining Control-M installation files, to the home directory of the drive where the existing Control-M/Server is installed.

3. From a command prompt window, enter <source_path>\setup.exe.

4. Do one of the following:

   • Interactive upgrade: Select the Control-M/Server option and continue with the on-screen instructions until the upgrade is complete.

   • Automatic upgrade: Create a parameter file and then run the automatic install in a non-interactive mode, as follows:

     1. Select the Control-M/Server option and continue with the on-screen instructions until the Summary window.

        There is no confirmation to shut down Control-M/Server processes. It is done automatically.

     2. Click Generate and select the location to create the XML parameter file.

     3. Click Yes to quit the upgrade.

        A confirmation message appears.

     4. Click Yes.

     5. Copy the automatic upgrade parameters file to a network location that is accessible to all computers where you want to perform an automatic upgrade.

     6. Log in using a user ID that has Administrator permissions on the current computer.

     7. Ensure that the upgrade DVD is still in the DVD drive, and run the upgrade script, as follows:

        <source_path>\Setup_files\components\ctm\setup.sh -silent <xml_path>\<filename.xml>

        The upgrade log can be found at the following location:

        %temp%\BMC_Control-M_Server_<date-time>.log

Upgrading Control-M/Agent on UNIX

This procedure describes how to upgrade from Control-M/Agent 9.0.00.300 and higher to the latest version of Control-M/Agent on UNIX, which includes Application Integrator and Automation API CLI. If you want to upgrade multiple instances of Control-M/Agent on several computers using the same configuration, use the automatic upgrade, as described in this procedure.

The default upgrade is interactive and uses a GUI display. XServer must be running and configured using the DISPLAY environment variable. If you do not have XServer available, BMC recommends that you continue with the console upgrade or perform an automatic upgrade.

Before You Begin

Ensure that you have met the following requirements:

• Ensure that your operating system is compatible with the new version of Control-M/Agent, as described in Agent System Requirements for Linux.

• Define the external Java location, as described in Control-M Pre-Installation Procedures.

• Ensure that the Internal Process Communication (IPC) subsystem is enabled.

• Verify that your locale is set to English before beginning the upgrade.

• (AIX only) You must set the tcp_nodelayack to 1 as a root user, as follows:

  /usr/sbin/no -o tcp_nodelayack=1

Begin

1. Log in as a Control-M/Agent user and then switch to user root.

   If you are upgrading Control-M/Agent in non-root mode, log out user root and log in as the Control-M/Agent user.

2. Copy the installation files from the temporary directory that you created in Obtaining Control-M Installation Files, to the Agent home directory.

3. Set your DISPLAY environment variable, as described in Setting Environment Variables in UNIX.

4. From the Agent home directory, type the following command:

   <source_path>/setup.sh

5. Do one of the following:

   • Interactive upgrade : Select the Control-M/Agent option and continue with the on-screen instructions until the upgrade is complete.

   • Automatic upgrade: Create a parameter file and then run the automatic install in a non-interactive mode, as follows:

     1. Select the Control-M/Agent option and continue with the on-screen instructions until the Summary window.

        There is no confirmation to shut down Control-M/Agent processes. It is done automatically.

     2. Click Generate and select the location to create the XML parameter file.

     3. Click Yes to quit the upgrade.

        A confirmation message appears.

     4. Click Yes.

     5. Copy the automatic upgrade parameters file to a network location that is accessible to all computers where you want to perform an automatic upgrade.

     6. To run the upgrade script, type the following command:

        <source_path>/Setup_files/components/agent/setup.sh -silent <xml_path>/<filename.xml>

        The upgrade log can be found at the following location:

        <$HOME>/BMCINSTALL/log/BMC_Control-M_Agent_<date-time>.log

Upgrading Control-M/Agent on Windows

This procedure describes how to upgrade from Control-M/Agent 9.0.00.300 and higher to the latest version of Control-M/Agent on Windows. If you want to upgrade multiple instances of Control-M/Agent on several computers using the same configuration, use the automatic upgrade, as described in this procedure.

Before You Begin

• Ensure that your operating system is compatible with the new version of Control-M/Agent, as described in Agent System Requirements for Windows.

• Define the external Java location, as described in Control-M Pre-Installation Procedures.

Begin

1. Log in to the computer using a user ID that has Administrator permissions.

2. Copy the installation files from the temporary directory that you created in Obtaining Control-M installation files, to the home directory of the drive where the existing Control-M/Agent is installed.

3. From a command prompt window, enter <source_path>\setup.exe.

4. Do one of the following:

   • Interactive upgrade : Select the Control-M/Agent option and continue with the on-screen instructions until the upgrade is complete.

   • Automatic upgrade :Create a parameter file and then run the automatic install in a non-interactive mode, as follows:

     1. Select the Control-M/Agent option and continue with the on-screen instructions until the Summary window.

        There is no confirmation to shut down Control-M/Agent processes. It is done automatically.

     2. Click Generate and select the location to create the XML parameter file.

     3. Click Yes to quit the upgrade.

        A confirmation message appears.

     4. Click Yes.

        The automatic upgrade XML parameters file that is created (<filename>.xml) is relevant only for computers with the same agent instance name. Otherwise, a separate <filename>.xml file must be created for each computer, or modified manually for each computer.

     5. Copy the automatic upgrade parameters file to a network location that is accessible to all computers where you want to perform an automatic upgrade.

     6. Log in using a user ID that has Administrator permissions on the current computer.

     7. Ensure that the upgrade DVD is still in the DVD drive, and run the upgrade script, as follows:

        <source_path>\Setup_files\components\agent\setup.exe -silent <xml_path>\<filename.xml>

        The upgrade log can be found at the following location:

        %temp%\BMC_Control-M_Agent_<date-time>.log

Upgrading the PostgreSQL Database Server

This procedure describes how to upgrade the PostgreSQL database server to the latest supported version. After you have upgraded Control-M/EM or Control-M/Server, the PostgreSQL database server version remains the same. If you want to use version 9.0.21 you must upgrade the PostgreSQL database server.

Before you begin:

• Verify that there is enough disk space to contain an additional PostgreSQL database server. The free space must be greater than the size of the <Control-M_Home>\pgsql directory including an additional 25%. The upgrade checks if there is enough space and it fails if it is not enough. For example, if the size of the pgsql directory is 1 GB, the upgrade requires at least 1.25 GB of free space.

• Upgrade Control-M/EM or Control-M/Server to version 9.0.21.

• Note that the upgrade requires down time of Control-M. The time for upgrade depends on the size of database. In most scenarios, the upgrade completes in 10 minutes. In a large scale environment it might take up to an hour.

Begin

1. Navigate to one of the following PostgreSQL server upgrade package locations:

   UNIX: <cdPath>/Setup_files/TOOLS/pg_server_upgrade.tar.gz

   Windows: <cdPath>\Setup_files\TOOLS\pg_server_upgrade.zip

2. Copy the package to one of the following locations:

   • Full Installation and Control-M/Server on UNIX: $HOME

   • Control-M/Server on UNIX: $HOME

   • Control-M/EM on UNIX: $HOME/ctm_em/

   • Full Installation on Windows : <Control-M Home>\Control-M Server

   • Control-M/Server on Windows: <Control-M Home>\Control-M Server

   • Control-M/EM on Windows: <Control-M Home>\Control-M EM 9.0.00\Default

3. Do one of the following:

   • UNIX: Type the following commands to open and uncompress:

     1. gunzip pg_server_upgrade.tar.gz

     2. tar -xvf pg_server_upgrade.tar.gz

   • Windows: Extract the pg_server_upgrade.zip.

4. Shut down Control-M/EM or Control-M/Server components (both for Full Install):

5. Navigate to the pg_server_upgrade directory and run one of the following commands:

   • UNIX: PG_Upgrade.sh

   • Windows: PG_Upgrade.bat

6. Follow the on-screen instructions until the upgrade is complete.

   If you want to downgrade to the old PostgreSQL database server version, rename the the pgsql.old.<timestamp> directory to pgsql. The database server is reverted to the existing version before the upgrade. Any changes made to the new PostgreSQL server are not applied to the downgraded PostgreSQL server version.

Upgrading an External Oracle or MSSQL Database Server

This procedure describes how to upgrade an external Oracle or MSSQL database server after you have upgraded Control-M/EM or Control-M/Server.

Begin

1. Verify that the database server version is supported, as described in Product Availability & Compatibility.

2. Verify the database server requirements, as described in Database Server Requirements.

3. Contact your DBA to upgrade your database server.

   • If the connection properties have changed in the new database server, update Control-M/EM or Control-M/Server configuration to point to the new location, as described in Reconfiguring the Database Server Connection Data.

   • (Oracle only) You can upgrade Control-M to version 9.0.21 using Oracle 12c as an external database server, but you must upgrade your external database server to a supported version before you start up Control-M components.

Upgrading Control-M in a Disaster Recovery Configuration

This procedure describes how to upgrade Control-M/EM and Control-M/Server in a Disaster Recovery configuration on UNIX and Windows. In a disaster recovery environment, the database in the recovery site is set to read-only, which enables replication from the primary site. This procedure allows you to upgrade without changing the read-only status of the database and without interrupting the database replication.

The database in the disaster recovery environment must have read access.

Begin

1. Set the inst_skip_db_changes environment variable to Y where the upgrade is executed.

2. Do one of the following:

   To upgrade Control-M/EM, see Upgrading Control-M/EM on UNIX or Upgrading Control-M/EM on Windows.

   To upgrade Control-M/Server, see Upgrading Control-M/Server on UNIX or Upgrading Control-M/Server on Windows.

3. Set the inst_skip_db_changes environment variable to N.